How to set up a home theater system?

All Room Designer Series Home Theater Speaker System

• well-built satellites that will fit each room
• Discrete Teardrop Shape /Diminutive Proportions
• 4 Pieces of Satellite speaker Allroom / Color Red
• 1 Piece of Center Speaker Allroom
• 150W Acebase Allroom Subwoofer /color Black

The AllRoom Designer Series Home Theater Speaker System 5.1 are colorful, well-built satellites that will fit each room. The discrete teardrop shape and diminutive proportions are counterbalanced by a high-interpretation hand lacquering. Allroom has a rich and musical signal stage considering its tiny size. They are ideal in a small setup, for instance in the teenage room, kitchen or at the summer house. Box contains:
4 Pieces of Satellite speaker Allroom / Color Red, 1 Piece of Center Speaker Allroom, 1

List Price: $ 599.99

Price: $ 199.99

by Jordanhill School D&T Dept

I hav a Sony Bravia LCD TV and a LG LHB335 blu-ray home theater system. I can get the dvd to play on the tv and the signal comes from the speakers. How do I get the audio from the tv to come out of the home theater system speakers? Do I need a Surround signal speaker bar to go with this set up? Need as much info as I can get. Help.

Answer by Trung
Here is the setup…

When you play a DVD, it is decoded by the Blu-ray which has surround signal set up. Predictable connect is HDMI which also has signal through the LCD TV. So sounds come from the Blu-ray, not the TV. The TV is just another speaker.

The Blu-ray has numerous audio channel typcially 5:1 or 7:1 depending on the digit of speaker channel. Each one is design specifically to project different level of sounds. The Subwoofer project bass signal. Side speakers with tweekers project sharp audio sounds. Center and rear speaker has a combination of Large, medium, and small speakers. Together they form a signal system, with each project a specific sounds to enhance the audio experience. Each one sure be marks and the Blu-ray should have come with a instruction manuals for the setup.

This is the setup for surround system on wikipedia:
http://en.wikipedia.org/wiki/Home_cinema

Answer by TV guy
Your HTS has two digital audio inputs; connect the dig. audio output from the TV to one of them.
If your TV’s output is coax and your HTS has only optical, you need a s/pdif coax to optical adaptor.
If you have a set-top box, connect the set-top box dig. audio out to the HTS.

Answer by _(“<")_
connect the tvs optical out to the surround signal optical in. You dont need a signal bar that is what you have the theater system for

Answer by BANG P
Connect optical cable or composite cables ( red & white ) from cable box or TV to Home Theater System for audio.

What do you reckon? Answer below!

Desktop Audio Upgrade


Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of being now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few being ago I was doing some research into speakers and I came crosswise the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I chose to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was promotion individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked like peas in a pod to the Quad 11l actives. Plus, they were groundbreaking new, in unopened boxes.

After a few hours of research I learned that IAG, Quad’s parent company, has an Industrial division that promote audio equipment for hotels, conference centres, address theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is like peas in a pod in each way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a huge fan of the Quad signal. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad signal as part of my desktop system at a part of the price.

Quad speakers are renowned for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other fantastic speakers out there. For me I liked the standing associated with being a Quad title-holder. I clearly liked the signal and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another vital factor was matching the speakers crosswise the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you'll listen to. So how do the Quad actives signal? Well place it this way… I’ve not stopped playing them since the minute they at home in the house. I’ve terrified everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may signal better than the 12l2s in my front room due to the fact that their bi-amp design is impeccably matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the signal could be characterised as being clean, clear with tight bass control and a surprising quantity of depth considering the cabinet size. Though being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s signal card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an ancient radio tuner through these. All I could lay my hands on at small notice was a phono switchbox. This worked but it was trying to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the signal the iMac was competent of producing. Looked like a DAC was vital. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio's Dacmagic or NuForce's uDac or Icon products. Necessarily it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce's website information is confusing. Being new to the world of DACs and desktop audio I knew small about by USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on signal quality and the technology used by NuForce to take right these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We're talking thousands of pounds. Their 'desktop' range is much more affordable though. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can't say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a decently digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most helpful piece of hi-fi equipment I've ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is open to the listener. Given I'm used to the full Quad/Arcam experience in the front room it's incredible how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you'll see from the photos I've experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it's really not vital the system is already competent of producing nearly terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I've been particularly enjoying the albums below. I've pretty much went into the backroom! All in all, a pretty excellent October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

Onkyo HT-S6300 7.1-Channel Home Theater Receiver and Speaker Wrap with iPod Dock

• 7.1-channel home theater system with receiver, subwoofer, center channel speaker, and six satellite speakers
• 1200 watts of total power (130W x 7 channels plus 290W subwoofer)
• Four 1080p competent HDMI inputs (V1.4a) supporting 3D video and Audio Return Channel
• 1080p scaling via Faroudja DCDi Cinema
• WRAT technology and discrete amp construction for cleaner signal

If you're looking to flesh out your movies, games, and music with lifelike, full-blooded surround signal, look no further than the HT-S6300. Reckon: quality on a budget. This feature-packed system sports four of the latest HDMI 1.4a inputs to handle your Blu-ray player and other high-definition devices. Non-HD video sources, meanwhile, can be upscaled to spectacular widescreen 1080p via HDMI and Faroudja DCDi Cinema. HDMI 1.4a is compatible with upcoming 3D video content and enables a handy Audi

List Price: $ 749.00

Price: Too low to show

Desktop Audio Upgrade


Image by Jordanhill School D&T Dept
I needed some new speakers for my desktop computer system at home. I’ve been tolerating JBL creature 2.1 system for a couple of being now and I’d finally had enough. The JBLs suffered from a depressing lack of critical midrange detail. This, coupled with the fact that the kids now hog the main system in the front room, means that I can’t get access to my iTunes library readily.

A few being ago I was doing some research into speakers and I came crosswise the Quad 11l actives. They were very well reviewed in a couple of Australian and New Zealand hi-fi publications. From what I could gather at the time they were not widely available in the UK. When I did eventually track them down their price tag was £600 for a pair. Prohibitively expensive for a desktop audio system. These things are marketed as pro-level near field monitors. They have their own build in amps. Two per speaker. 60W for the bass driver and 40W for the treble driver.

Anyway a couple of weeks ago I chose to have a casual squint at eBay and see if I could pick up a second hand pair at a vastly reduced price. There were none available. One seller was promotion individual speakers new for £250. apiece. Still too expensive. Crestfallen, I gave up. A couple of days later I had another look. Another seller was offering a pair of Quad actives for £229. Stunned, I had a closer look. Apart from a different badge, Quad Industrial, these looked like peas in a pod to the Quad 11l actives. Plus, they were groundbreaking new, in unopened boxes.

After a few hours of research I learned that IAG, Quad’s parent company, has an Industrial division that promote audio equipment for hotels, conference centres, address theatres, and the like. Hence the different branding. The speaker also goes by another name, the Quad QPM1. Other than that it is like peas in a pod in each way to the Quad 11l active monitor.

This was a game changer. Prior to this I was considering the Audioengine 2 model as my desktop speaker replacement. I phoned the supplier to check that there was no mistake in their pricing in the advert. They confirmed that they were on sale for £229 for the pair. I placed my order immediately.

I was very excited to hear these speakers given the reviews I’d read. I’m also a huge fan of the Quad signal. My front room consists of the Quad 12l2s as main speakers in my 5.1 kit, Quad Centre, Quad l-ite satellites for rear and Quad l-ite subwoofer. Now I could have the Quad signal as part of my desktop system at a part of the price.

Quad speakers are renowned for being extremely neutral. In other words they take nothing away from or add anything to the original recording or source. Although my Quads were all very well reviewed at the time of their release, around 2004-2007, there are other fantastic speakers out there. For me I liked the standing associated with being a Quad title-holder. I clearly liked the signal and most importantly I got all the kit at bargain prices. Most of it was ex-dem so I saved at least 20% on the normal retail price. Another vital factor was matching the speakers crosswise the whole 5.1 kit. All of them should work well together. The 5.1 kit is driven by an Arcam AVR 300 that again was ex-dem. The front speakers are bi-amped and bi-wired. This affords them 120 watts per channel and per driver.

Being a hi-fi enthusiast makes you a bit picky about what you'll listen to. So how do the Quad actives signal? Well place it this way… I’ve not stopped playing them since the minute they at home in the house. I’ve terrified everything at them. From Led Zepp to Beethoven. Alison Krauss through to Prokofiev. Unbelievable! If anything the Quad actives may signal better than the 12l2s in my front room due to the fact that their bi-amp design is impeccably matched to the drivers in a way that any other amp would struggle to better. There is plenty of power and the signal path is not compromised by additional cabling and junction points. So the signal could be characterised as being clean, clear with tight bass control and a surprising quantity of depth considering the cabinet size. Though being nearfield monitors they are very revealing! If the recording is poor it sounds poor through these. You are very conscious of it. Also after a few days I became very aware of the deficiencies of the iMac’s signal card. There was a constant low hum and other nasties such as buzzing and clicks. Hissing too. Another issue was that I wanted to run an ancient radio tuner through these. All I could lay my hands on at small notice was a phono switchbox. This worked but it was trying to control the volume of the tuner other than messing around at the back of the monitors. Not really ideal.

I realised I need to look for some kind of preamp. Nothing suitable for desktop audio seemed immediately available. Initially I started looking at pro audio solutions. Mixers and the like. Not only were these really expensive but they also took up a lot of desk space. The other thing that seemed clear was that some kind of external signal processing solution would improve on the signal the iMac was competent of producing. Looked like a DAC was vital. This took me into a whole new ballpark. It came down to two companies in the end. Cambridge Audio's Dacmagic or NuForce's uDac or Icon products. Necessarily it came down to my need to switch sources easily and the ability to control volume at the turn of a dial or via an installed remote app on an iPhone. The Dacmagic looked very tempting but there was no preamp function or headphone amplifier. This left me with the NuForce products.

NuForce's website information is confusing. Being new to the world of DACs and desktop audio I knew small about by USB as a means of feeding an external digital to analogue converter with a digital signal. I was familiar with toslink optical links from the Arcam processor but USB was new to me. So I started reading about jitter and the degrading effect is has on signal quality and the technology used by NuForce to take right these issues. I also read some astonishing reviews on their uDac, Icon 2 and Icon HDP products. Turns out NuForce are an American company that specialises in really high end digital amplifiers and DACs. We're talking thousands of pounds. Their 'desktop' range is much more affordable though. The uDac was offered to me for £55 for example. In the end I got a fantastic deal on the Icon HDP. I had to make a couple of phone calls at this point. I can't say how much I saved but I got a better bargain on this than I got on the Quads! The Icon HDP is a combined class A headphone, preamp and top quality DAC rolled into one. Perfect for my needs.

Now we have the combined effect of the iMac and its ability to feed a decently digital signal from iTunes or Spotify Premium to the NuForce Icon HDP via USB and then onto the Quad QPMs. The effect the Icon HDP had on the system was staggering. This truly is a phenomenal product. Undoubtedly the most accomplished, best sounding and most helpful piece of hi-fi equipment I've ever bought. The whole soundstage opened right up. Subtle nuances present in the recordings were revealed in extraordinary detail. A truly three dimensional space is open to the listener. Given I'm used to the full Quad/Arcam experience in the front room it's incredible how lifelike and articulate my bargain desktop audio solution really is. The Quads in themselves are remarkable for the price but the Icon HDP is literally a revelation.

As you'll see from the photos I've experimented with this system in all sorts of combinations. At one point I even hooked up the Quad sub to hear the difference it made. I concluded it's really not vital the system is already competent of producing nearly terrifying levels of deep controlled bass without it. Midrange too is superb. Treble crisp and smear free. I've been particularly enjoying the albums below. I've pretty much went into the backroom! All in all, a pretty excellent October week…

Trentemøller – The Very Last Resort
Mercan Dede – 800
Sergei Rachmaninoff – Rachmaninov
Alison Krauss – Lonely Runs Both Ways
John Hiatt – Hiatt Comes Alive At Budokan?
Booka Shade – Memento
Avishai Cohen – Aurora

By the way the Quads are still available on eBay, last few remaining. Other speakers shown for comparison.

are there any stores off the internet i can browse in

Answer by mark_hensley@sbcglobal.net
Ebay and Tiger Direct are fantastic options. Arguably you can’t do better than ebay. If your not one to set up an ebay account, Tiger Direct and Price Grabber are reputable websites with excellent bargains. Amazon is always a excellent gauge for how much items cost and the low down on what is excellent and what is not, but Amazon doesn’t hold the title of best when it comes to deals on the internet.

Delight in.

Answer by bbt91945
I recommend you go to the nearest audio/video store first and demo the speakers before making any buy on line. Best Buy and Fry’s Electronic are the best house to demo them. Bring you own source of material for the demo to make sure that you like the signal. You can not listen at
the speakers on line. For quality signal look at brands like JBL, Infinity, Definitive Technology, Energy, Klipsch, Mirage and Polk Audio. You can also read the reviews on line at Home Theater Magazine. Hope this will help you out.

Add your own answer in the comments!